Fermax 100 CODE MEMOKEY cityline - Memokey System Introduction; System Overview; System Features

Pag 4
Memokey
Memokey
- The Memokey has capacity for 100 different codes of variable
length (between 4 and 6 digits).
Entering one of the codes via the keypad activates a relay
which activates the lock-release or another device.
- The system does not allow user codes to be repeated.
- To enter programming mode, you must enter a special code,
known as the Master Code.
- If this option is enabled, any user can modify their personal
access code without knowing the Master code.
-The system has an auxiliary output which supplies a maximum
of 125mA to connect/activate another device (auxiliary relay,
alarm ...) or a speaker, with the memokey itself generating
an alarm tone.
- It is equipped with 2 auxiliary inputs for the exit button.
- Free Access Codes
- Key Press Confi rmation via an acoustic tone.
System Features:
The Memokey’s 100 codes are designed for keypad based
access control, where we want each system user to have their
own access code.
PROGRAMMING MANUAL
Introduction