Fermax 100 CODE MEMOKEY cityline - Programming Functions; Programming Mode Overview

Pag 6
Memokey
Memokey
Signal Leds: Has two leds, one red and one green.
( Led on Led off Leds fl ashing)
PROGRAMMING AND CONFIGURATION
Programming Mode allows you to modify the system’s
different settings and confi guration.
Initially the system is programmed by default with a 4 digit
code. As such the user codes and MASTER code are 4 digits
in length. If you require greater security you can change the
length to 5 or 6 digits. See the chapter on: “Establishing the
User Code Length”
987
654
321
A
B
0
RED -
GREEN
DEFINITION
No Power
Normal mode (awaiting access code
entry, programming...). Device Powered
Up.
Opening Door
Quick Flashes: Programming Mode
Slow Flashes: Awaiting the new value for
the selected function