Fermax 100 CODE MEMOKEY cityline - Page 7

Pag 7
Memokey
Memokey
987
654
321
A
B
0
987
654
321
A
B
0
Enter 1480
Enter A4
beep
(x3) :
1) To enter programming mode (having
been in normal mode), enter the
Master Code (1480 by default).
The system emits “3 beeps” to advise
we are in programming mode, and the
green led fl ashes in quick sequence.
2) To confi gure each of the functions
(in programming mode) enter the
corresponding function code (for
example: “A4” code length).
At this point the system once again
emits “3 beeps” to advise that the setting
entered is correct, and the green led
fl ashes in a slow sequence .
987
654
321
A
B
0
3) Then a new value is entered to be
assigned to the function selected (for
example: selecting a code of 6 digits
in length).
Press 6
beep
(x3) :
beep
(x3) :
To exit Programing mode at any time, press B or allow
20 seconds to elapse without any activity.