Pag 2
Code 97528I, V04_13
Technical publication of an informative nature published by FERMAX
ELECTRONICA S.A.U.
As part of its policy of constant improvement, FERMAX ELECTRONICA
S.A.U. reserves the right to modify the content of this document and the
characteristics of the products referred to in it at any time and without
prior notice.
Any modifi cation will be refl ected in subsequent editions of this document.
ENGLISH
This kit is programmed at the factory with 3 default codes.
The preprogrammed codes are different for each unit, there-
fore you are the only one to know them.
You can use this codes to test the equipment operation as
well.
To test the code, dial the the one corresponding to the de-
vice you want to verify.
(*) These codes are shown in a sticker in the back side of the panel
controller.
KEYPAD MODULE TEST
CODE ACTION
CODE 1 (*) OPEN THE DOOR
CODE 2 (*) ACTIVATE THE AUXILIARY DEVICE (if any)
CODE 3 (*) BOTH OPEN THE DOOR AND ACTIVATE
THE AUXILIARY DEVICE
To Next Page
Loading...
General