Pag 17
SISTEMAS
MEMOKEY 100C
MEMOKEY 100C
USER MANUAL
This equipment has a keypad that enables a door to be opened, or an auxiliary electrical
device activated, when a personalised code is entered.
Up to 100 different personal codes can be programmed.
Usually, one of these codes is given to each system user, taking as users not only those
habitually entering the building or premises but also those who do so only occasionally (for
example office workers).
The users use their personal code or codes to carry out the functions associated with them
(open the door, activate/deactivate an alarm, etc.).
Being personal codes, you can prevent the use of any of them at any time by a given user
simply by deleting the code from the system.
Management of all personal codes (startup, cancellations, etc.) is the responsibility of the
system administrator.
The ENTRY KITS also carry out door entry function and the VIDEO ENTRY KITS also have
audio and video.
Introduction
NOTES:
99
99
9 The SYSTEM ADMINISTRATOR can assign each authorised user a personal code
to open the door and/or activate an auxiliary electric device.
99
99
9 Users can change their own personal code, if this option has been enabled by the
SYSTEM ADMINISTRATOR.
99
99
9 The system is anti-sabotage protected, so that after three erroneous codes are
entered in the keyboard it will be blocked for 20 seconds, emitting disuasory
beeps during this period.
99
99
9 If setting up the emergency function, copy in the space on the following page the
function to be carried out.
99
99
9 Give each user a copy of the following page with their corresponding code.
To Next Page
Loading...
Need help?
General