CLR
Festo – CLR – 2017-05e English 5
4 Transport and storage
S Take into account the weight of the product (plus clamping finger and fasten
ing elements).
Depending on the design the CLR-... can weigh up to 2.7 kg.
S Ensure the following storage conditions:
– short storage times and
– cool, dry and shady storage locations to prevent corrosion.
5 Conditions of use
Please note
Incorrect handling can result in malfunctions.
S Ensure that the specifications in this chapter are always observed.
This is the only way to ensure correct and safe operation of the product.
S Compare the limit values specified in these operating instructions with your
current application (e.g. pressures, forces, torques, temperatures, masses,
speeds, clamping cycles).
Only if the loading limits are observed can the CLR-... be operated in
accordance with the relevant safety guidelines.
S Observe the specifications applicable to your location, as well as all local and
national laws and regulations.
To Next Page
Loading...
Need help?
General
