Festo CMMS-ST-C8-7-G2 Mounting And Installation

2 Produc t overview
12 Festo – GDCP-CMMS-ST-G2-HW-EN – 1404NH – English
2.2 Scope of delivery
Number Component
1 Motor controller CMMS-ST-C8-7-G2
1 Operator package
– Brief description
– CD-ROM with following contents:
– Parameterisation software “Festo Configuration Tool” (FCT)
– Documentation on the product
– S7 module
– Configuration files for the supported bus systems (e.g. device core da ta for
PROFIBUS ( G S D), electronic data sheet ( EDS) for DeviceNet, etc.)
– Firmware
1 Assortment of plugs (plugged into connections)
Tab. 2.1 Scope of delivery
Accessories  www.festo.c om/catalogue

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English