Introduction
© Festo Didactic • MPS
®
PA Compact Workstation
9
In principle all of our „Terms and Conditions of Sale“ apply. These are available to
the operating authority upon conclusion of the contract at the latest. Warranty and
liability claims for persons or material damage are excluded if these can be traced
back to one or several of the following causes
• Use of the machine not in accordance with its intended purpose
• Incorrect assembly, commissioning, operation and maintenance of the machine
• Operation of the machine using faulty safety equipment or incorrectly fitted or
non operational safety or protective devices
• Non observance of notes in the operating instructions regarding transport,
storage, assembly, commissioning, operation, maintenance and setting up of the
machine
• Unlawful constructional modifications on the machine
• Inadequate monitoring of machine components subject to wear
• Incorrectly carried out repairs
• Catastrophes as a result of foreign objects and acts of force major.
Festo Didactic herewith rules out any liability for damage or injury to trainees, the
training company and /or other third parties which may occur during the use /
operation of the system other than purely in a training situation, unless such
damage has been caused intentionally or due to gross negligence by Festo Didactic.
This system has been developed and produced exclusively for vocational and further
training in the field of automation and communication. The training authority and /
or the instructors is / are to ensure that trainees observe the safety precautions
described in the manual provided.
The use of the system for its intended purpose also includes:
• following all advice in the operating instructions and
• carrying out inspection and maintenance work.
1.6
Warranty and liability
1.7
Use for intended purpose
To Next Page
