5Festo — MS6-SV-...-E-10V24 — 2019-10d
1 Applicable documents
All available documents for the product èwww.festo.com/pk.
1.1 Specified standards
Version
EN ISO 12100:2010-11 EN 60068-2-27:2009-05
EN ISO 13849-1/AC:2009-03 EN 61131-2:2007-09
EN ISO 13849-2:2012-10 IEC 60204-1:2009-02
EN 60204-1/A1:2009-02 ISO 8573-1:2010-04
EN 60068-2-6:2008-02 ISO 19973-1:2015-08
EN 61508-1:2011-02
Tab. 1 Standards specified in the document
2 Safety
2.1 Safety Instructions
– Only use the product in original status without unauthorised modifications.
– Only use the product if it is in perfect technical condition.
– Observe labelling on the product.
– Take into consideration the ambient conditions at the location of use.
– Prior to mounting, installation and maintenance work: Switch off power supply and secure it from
being switched back on.
– Observe tightening torques. Unless otherwise specified, the tolerance is±20%.
– The product must be operated only with the specified multi-pin plug sockets NECA-S1G9-P9-MP....
– Non-compliance with the information in this instruction manual can lead to loss of the safety func-
tion.
2.2 Intended Use
The product is intended solely for fast and safe venting and for building up pressure gently in pneu-
matic piping systems and terminals in industry. The product is a safe, redundant mechatronic system
designed for implementation of the safety functions:
– Safe venting
– Protection against unexpected pressure build-up (pressurisation).
Applicable documents
To Next Page
Loading...
Need help?
General
