Festo MS6 SV E 10V24 Series User Manual

The product is intended for installation in a machine or automated system and must be used exclus-
ively as follows:
– In an industrial environment
– Within the limits of the product defined by the technical data è 14 Technical Data.
– In its original condition, without unauthorised modifications
– In perfect technical condition
– In standard operation, which includes standstill, set-up and service operation, as well as emer-
gency operation
2.3 Foreseeable Misuse
The following examples of foreseeable misuse are among those not approved as intended use:
– Outdoor use
– Operation without adequate venting options è 6 Assembly
– Use as press safety valve
– Bypass of the safety function
– Use in reversible operation (using supply air instead of exhaust air, and vice versa)
– Vacuum operation
– Use of incorrect or clogged silencers
2.4 Training of qualified personnel
Installation, commissioning, service and disassembly should only be conducted by skilled personnel.
The skilled personnel must be familiar with the installation of electrical and pneumatic control sys-
tems.
3 Additional information
– Accessories èwww.festo.com/catalogue.
– Spare parts èwww.festo.com/spareparts.
4 Service
Contact your regional Festo contact person if you have technical questions èwww.festo.com.
5 Product Overview
5.1 Design
5.1.1 Product design
The product corresponds to category 4 with a maximum achievable performance level e in accordance
with EN ISO 13849-1.
Additional information
6 Festo — MS6-SV-...-E-10V24 — 2019-10d

Festo MS6 SV E 10V24 Series Specifications

General

Brand	Festo
Model	MS6 SV E 10V24 Series
Category	Control Unit
Language	English