Festo TP 1422 - Equipment Set for Basic Principles of Stepper Motor Drive Technology (TP 1422); Allocation of Components and Exercises

XII © Festo Didactic GmbH & Co. KG 571861
Equipment set for Basic Principles of Stepper Motor Drive Technology (TP
1422)
The equipment set for Basic Principles of Stepper Motor Drive Technology (TP 1422) teaches students about
the basic principles and use of stepper motors. It contains all the components needed to work through the
specified learning objectives and can be supplemented with other equipment sets.
To create operational circuits, the slotted assembly board and a 24 V DC power supply unit are also
necessary.
Component Order no. Quantity
Stepper motor controller CMMS-ST-… (incl. interface cable) 1
Stepper motor EMMS-ST-57-… (incl. connecting cables) 1
Rotary drive 1
Inductive proximity sensor M8 2
Connecting cable sensor 2
Festo Configuration Tool software 1
To carry out exercise 6, you will also need the following components.
Component Order no. Quantity
I/O simulation box 1
I/O SysLink cable 1
Allocation of components and exercises
Exercise 1 2 3 4 5 6
Component
Stepper motor controller CMMS-ST-... 1 1 1 1 1 1
Stepper motor EMMS-ST-57-… 1 1 1 1 1 1
Rotary drive 1 1 1 1 1 1
Inductive proximity sensor M8 2 2 2 2 2 2
Connecting cable sensor 2 2 2 2 2 2
Festo Configuration Tool software 1 1 1 1 1
I/O simulation box 1
I/O SysLink cable 1
24 V DC power supply unit 1 1 1 1 1 1