18
Service and maintenance
Damaged safety devices and components must be
repaired or replaced in a recognised specialist
workshop, unless otherwise indicated in the oper-
ating manual.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of any obstruction.
–Check the guidance roller regularly for wear.
–Regularly remove dust deposits from the chip
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
X
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
WARNING
Risk of injury, electric shock
X
Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
To Next Page
Loading...
