8
operations different from those intended could
result in a hazardous situation.
h.
Keep handles dry, clean and free from oil and
grease.
Slippery handles do not allow for safe
handling and control of the tool in unexpected
situations.
5 SERVICE
a.
Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts.
This will ensure that the safety of the pow-
er tool is maintained.
Machine-related safety instructions
–
Hold power tool by insulated gripping surfaces,
when performing an operation where the cut-
ting accessory may contact hidden wiring or its
own cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
–
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the workpiece by hand or against your
body leaves it unstable and may lead to loss of
control.
–
Stroboscopic light can cause epileptic seizures.
Do not use this machine if you are susceptible to
epileptic seizures.
–Do not look into the stroboscope light. Looking
into the light source can damage your vision.
Health hazard by dust
WARNING!
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
•lead from lead-based paints,
•crystalline silica from bricks and cement and
other masonry products, and
•arsenic and chromium from chemically treated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Technical data
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Jigsaws PS 420 EBQ PSB 420 EBQ
Power 400 W
Stroke speed 1500 - 3800 rpm 1000 - 3800 rpm
Stroke length 26 mm (1.02 ’’)
Pendulum stroke 4 steps
max. inclination (only with accessory angle
table WT-PS 400)
45° to both sides
max. cutting depth (depending on saw blade)
Wood 4-3/4’’ (120 mm)
Aluminium 3/4’’ (20 mm)
Steel 3/8’’ (10 mm)
Weight 4.2 lb. (1.9 kg)