6
Contents
Symbols
Safety instructions
General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 WORK AREA SAFETY
a.
Keep work area clean and well lit.
Cluttered and
dark areas invite accidents.
b.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
Symbols ............................................... 6
Safety instructions............................... 6
Technical data ...................................... 8
Functional description......................... 9
Intended use ........................................ 9
Operation ............................................. 9
Settings................................................ 10
Working with the machine................... 13
Accessories.......................................... 14
Service and maintenance .................... 18
Environment ........................................ 19
Vvolts
Aamperes
Hz hertz
~
a.c.
alternating current
d.c.
direct current
n
0
no load speed
Class II construction
rpm
min
-1
revolutions per minute
’’ inch
lbs. pound
diameter
hint, tipp
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Disconnect from the power supply!
Do not throw in the household waste.
To Next Page
Loading...
Need help?
General
