Festool DOMINO - Page 28

A
B
C
1 2 3 3 2 1
2726
1
The stop pins serve as distance pieces
to the router centre and can be sepa-
rately located.
Pins (
1
–
2
–
3
) allow three
separate distances to a reference
edge.
The pins allow two domino holes to
be placed adjacent to each other
at a defined distance to a reference
edge (
1
–
3
).
The pins allow two domino holes to be
placed by rotating the workpiece, e.g.
for the same moulding cross-section.
50 mm
37 mm
20 mm
2016_FES_DOMINO_Book_GB-en.indb 26 03.03.16 12:13