1 2
3 4
5150
4
4.3 Rack joints and secure spindle positioning
Making rack joints with the DOMINO joining machine saves an incredible amount of time. Especially
when relatively narrow spindles are being processed, working with the trim stop (available as an
accessory or included in the DF 500 set) is recommended for safe and precise workpiece routing. This
trim stop fits both the DF 500 and the DF 700 and securely holds spindles with 22 – 70 mm thickness.
2016_FES_DOMINO_Book_GB-en.indb 50 03.03.16 12:13
To Next Page
Loading...
