Festool DOMINO User Manual

2
1
3
4 5
5756
4
4.4 Round profile joints
When connecting round timber profiles, such as those used for handrails, the handrail fence is
available as an accessory to ensure a secure workpiece hold. This part fits both the DF 500 and
the DF 700 for diameters from 35–60 mm. The following example describes how a stop is created
using this handrail.
Before starting, ensure that the correct router is used. In this
example, we are processing an 8 x 40 mm domino, so the 8 mm
router must be used.
Set the routing depth to 20 mm.
Select the routing height so that the domino is offset towards
the inside of the mitre, preventing the routing from going
through the workpiece. In our example with a round timber
profile with 40 mm diameter, set the routing height to 20 mm.
2016_FES_DOMINO_Book_GB-en.indb 56 03.03.16 12:13

Festool DOMINO Specifications

General

Motor Power	420 W
Dust Extraction Connection Diameter	27 mm
Power Source	Corded Electric
Cutting Depth	15 mm, 20 mm, 25 mm, 28 mm
Cutter Diameter	5 mm, 6 mm, 8 mm, 10 mm