Festool DOMINO User Manual

4342
4
4.1 Overview: connections with DOMINO joining machines
The DOMINO system is ideally suited for board,
frame and rack joints, involving narrow or wide,
delicate or solid workpieces with dominos ranging
from 4 to 14 mm in diameter or flexible, separable
corner and flat connectors. In short, the DOMINO
system is perfect for realising infinite connection
possibilities.
The following chapter showcases examples of
how to work with these various connection types.
Naturally all of these examples are variable in
terms of size, material, and the size and number
of dominos, etc. Nevertheless, these examples
always demonstrate the basic procedure which
can be used as a reference.
Applications
Board connections
Drawers from 4 mm dominos
Furniture making with 5 mm and 6 mm dominos
Solid timber furniture with 8 mm and 10 mm dominos
Solid timber furniture (e.g. beds) with 12 mm and 14 mm dominos
Rack connections
Lightweight rack construction (e.g. chairs) up to 10 mm dominos
Stable rack construction (e.g. tables) with 10 mm to 14 mm dominos
Frame and stand designs
Frame joints
Furniture fronts in frame design with 8 mm and 10 mm dominos
Solid timber furniture in frame design
Entrance doors and internal doors
Additional applications
Connection of narrow trims from a width of 25 mm
Connection of rods with handrail fence
Corner connectors from 30 mm material thickness, separable
Connection of wide rails (e.g. solid timber panels)
Flat connectors from 30 mm material thickness, separable
2016_FES_DOMINO_Book_GB-en.indb 42 03.03.16 12:13

Festool DOMINO Specifications

General

Motor Power	420 W
Dust Extraction Connection Diameter	27 mm
Power Source	Corded Electric
Cutting Depth	15 mm, 20 mm, 25 mm, 28 mm
Cutter Diameter	5 mm, 6 mm, 8 mm, 10 mm