9
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Technical data
*
Depending on material
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Edge bander KA 65
Power 1050 W
Power supply 120 V~
Mains frequency 60 Hz
Edge height 18 - 65 mm (0.7 - 2.6’’)
*
Edge thickness 0.5 - 3.0 mm (0.02 - 0.1’’)
*
Inner radius > 50 mm (2.0’’)
*
Heating time approx. 8 min
Default melting temperature setting Setting 1 190 °C
Setting 2 200 °C
Melting temperature setting range Setting 1/2 100 - 210 °C
Feed speed 1st gear 2 m/min
2nd gear 4 m/min
Safety class I
Weight (without adhesive cartridges and mains cable) 7.9 kg (17.4 lbs)
[1-1]
Start button
[1-2]
Feed speed button
[1-3]
Handle
[1-4]
Rotary knob for adjusting the edge
height
[1-5]
Mains power cable
[1-6]
Extractor connector
[1-7]
Switch for temperature selection
[1-8]
On/Off switch
[1-9]
Safety lever for purging
[1-10]
Inlet roller
[1-11]
Edge inlet
[1-12]
Central plate
[1-13]
Drip catcher
[1-14]
Adhesive nozzle
[1-15]
Contact roller
[1-16]
Handle
[1-17]
Support base with start marking
[1-18]
Flap
[1-19]
Menu buttons
[1-20]
Display
[1-21]
Refill button
To Next Page
Loading...
