12/68
GB
2 PRELIMINARY MACHINE INFORMATION
3 Transport, Handling, Storage
In order to use the compressor in complete safety read the safety standards given
in section 1.3. before reading this section.
3.1 Transporting and handling the packed machine
The packed compressor must be transported by qualified personnel using a forklift
truck.
Before moving the machine ensure that the load-bearing capacity of the forklift truck is sufficient to take the
weight to be lifted.
Position the forks exclusively as illustrated below. Once the forks have been positioned in the points
indicated, lift slowly without jerking.
Never stand near the area where the compressor is being handled and never stand
on the crate while it is being moved.
3.2 Packing and unpacking
To avoid damages and to protect the compressor during transport it is usually placed on a wooden pallet,
to which it is secured by screws and covered with cardboard.
All the shipping and handling information and symbols are printed on the compressor packing. Upon
consignment remove the top part of the packing and check if any damages have been encountered during
transport. If any damages are found, caused during transport, immediately make a written claim, backed
up with photos of the damaged parts if possible and forward everything to your insurance company, with copy
to the Manufacturer and transporter.
To Next Page
Loading...
