FIBARO FGIC-001 - Configuration - Home and Device Setup; Creating Home; Configuration of the First Device

To Next Page

To Previous Page

CONFIGURATION - CREATING HOME & CONFIGURATION OF THE FIRST DEVICE

Creating home

In this step, it is possible to create a new home or login to existing one.

Conguration takes place through BLE (Bluetooth Low Energy) protocol.

Make sure that Bluetooth is enabled on your smartphone.

Create new home:

1) Create a home and name it.

2) Tap Next to move to Conguration of the rst device in Home section.

If you log in to existing home, just select it from the list and proceed to the next step.

Conguration of the rst device

1) Stand close to the device.

2) Make sure that your smartphone is connected through Wi-Fi to the same network and Bluetooth connection is enabled.

3) After opening the app, you will see the list of devices waiting for conguration.

You can see the strength of BLE signal. If the signal is too weak, try to come closer to the device.

4) Choose the right device and name it if you want. Then, the next step is Connecting to the network.