24
CONFIGURATION - RESETTING TO FACTORY SETTINGS
Resetting to factory settings
There are two ways of performing the reset of the device: through the mobile app or directly using the device. After completion, the
Intercom will be restored to factory settings. Please notice that all stored recordings will also be removed!
To reset the device through mobile app:
1) Open the app.
2) Go to Settings.
3) Select your device.
4) Find Status and tap it.
5) Tap Reset to factory button.
To reset the device directly:
1) Press and hold the ring and the button at the same time for about 10 seconds.
2) Release both when the device glows in red.
3) Enter the serial number using the rotating ring. Conrm each number with a short press of the ring.
4) Entering correct serial number will be conrmed by glowing in green and restarting.
To Next Page
Loading...