22
CONFIGURATION - ADDING MORE DEVICES & USER ROLES
Adding more devices
In case of installation of several devices in your house, it is possible to add another device to your home.
To add another device:
1) Go to Settings.
2) Find Devices section.
3) Tap Add Device button.
The conguration of following devices should process same as setting up of the rst device.
One step will be omitted - Conguration of the user.
All devices assigned to one Home should operate in the same network and must be connected in the same way (Wi-Fi or LAN).
User roles
There are three user roles available in FIBARO Intercom interface:
1) Administrator - can congure home, add and change settings of devices and add or invite users. The administrator can fully utilize the
system (calling, opening the gate, history of actions).
2) System user - can use the device (calling, opening the gate, history of actions) and manage account’s settings (set and change name,
photo, and PIN).
3) PIN user - can only open the gate though account’s PIN.
To Next Page
Loading...