FiberHome AN6001-G16 User Manual

AN6001-G16 Optical Line Terminal Equipment User Manual
DC Power Supply
The AN6001-G16 supports -48 V active-standby DC power supply featuring voltage
monitoring, failure alarm reporting and protection switching.
The table below describes the model numbers, appearance and input / output
specifications of the PDPs for the DC power supply scheme of the AN6001-G16.
Item PDP260B PDP296B
Model
3000063-1FA
3000063-2FA
3000068-1FA
3000068-2FA
Appearance
Range of input
voltage
-38 V to -60 V -38 V to -60 V
Number of input
channels
Two channels of power (one active
and one standby)
Two channels of power (one active
and one standby)
Input current
The maximum current of a single
channel is 96 A.
The maximum current of a single
channel is 96 A.
Range of output
voltage
-38 V to -60 V -38 V to -60 V
Number of output
channels
Six channels of output power Six channels of output power
Output current
The maximum current of a single
channel is 32 A.
The maximum current of a single
channel is 32 A.
Note:
The AN6001-G16 is equipped with the PDP260B (3000063) by default.
When lightning protection is required, use the PDP296B (3000068)
instead.
6
Version: A

FiberHome AN6001-G16 Specifications

General

Brand	FiberHome
Model	AN6001-G16
Category	Touch terminals
Language	English