EasyManuals Logo

FiberHome HG110 User Manual

FiberHome HG110
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Wireless ADSL Router User Manual
17
contains the range of the IP address that will automatically be assigned to the clients
on the network.
Starting IP Address The starting IP address for the DHCP server's IP assignment.
IP Pool Count The max user pool size.
Lease Time The length of time for the IP lease.
5.5.2. DHCP Relay
A DHCP relay is a computer that forwards DHCP data between computers that
request IP addresses and the DHCP server that assigns the addresses. Each of the
device's interfaces can be configured as a DHCP relay. If it is enable, the DHCP
requests from local PCs will forward to the DHCP server runs on WAN side. To have
this function working properly, please run on router mode only, disable the DHCP
server on the LAN port, and make sure the routing table has the correct routing entry.
DHCP Server IP for relay agent The DHCP server IP Address runs on WAN side.
5.5.3. DNS Server
The DNS Configuration allows the user to set the configuration of DNS (one primary,
one backup). DNS Relay selection If user want to disable this feature, he just need to
set both Primary and secondary DNS IP to 0.0.0.0.Using DNS relay, users can setup
DNS server IP to 192.168.1.1 on their Computer. If not, device will perform as no DNS
relay.
5.6. Wireless setting
From home page, you can find Interface setup option on the above router
configuration page.Click Wireless and you’ll see the following screen.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome HG110 and is the answer not in the manual?

FiberHome HG110 Specifications

General IconGeneral
BrandFiberHome
ModelHG110
CategoryNetwork Router
LanguageEnglish

Related product manuals