Wireless ADSL Router User Manual
5
Power Adapter x 1
Telephone Line x 2 (1m & 2m)
Ethernet Cable x 1
Base x 1
CD x 1
(User Manual. Quick Installation Guide. Installation software)
1.3. System Requirements
Before using this ROUTER, verify that you meet the following requirements:
Subscription for ADSL service. Your ADSL service provider should
provide you with at least one valid IP address (static assignment or
dynamic assignment via dial-up connection).
One or more computers, each contains an Ethernet 10/100M
Base-T network interface card (NIC).
A hub or switch, if you are connecting the device to more than one
computer.
For system configuration using the supplied web-based program: A
web browser such as Internet Explorer v5.0 or later, or Netscape
v4.7 or later.
1.4. Factory Defaults
The device is configured with the following factory defaults:
IP Address: 192.168.1.1
User Name: admin
Password: 1234
Subnet Mask: 255.255.255.0
SSID: Ralink_AP
Encapsulation: RFC 2516 LLC
VPI/VCI: According to local information
1.5. Warnings and Cautions
To Next Page
Loading...
