FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
14
FAILED – Procession failed.
Example
Retrieve
C04,B19,<index>
01 index: fence index, value 1~4, the same as index field in setting command.
B23 – Setting Alarm Action
Source
GPRS/COM/SMS
Description
B23,<alm-code>,<GPRS><SMS><two-way-call><monitor-call>
01 alm-code: Alarm type, refer to Appendix –A.
02 GPRS: Disable/enable GPRS uploading.
03 SMS: Disable/enable SMS to SOS number.
04 two-way-call: Disable/enable SOS number dialing under two-way conversation, set to
0 for actual usage.
05 monitor-call: Disable/enable SOS number dialing under monitor mode.
06 When both two-way-call and monitor-call are set, monitor-call is valid, while
two-way-call ignored.
07 two-way-call or monitor-call is valid when SOS number set, refer to B11 command for
SOS number(s) setting.
Reply
B23,<err_code>
01 err_code: procession error code.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
Example
B23,2,1101
01 Set action when SOS triggered:
a Sending GPRS alarm data to platform.
b Sending alarm SMS with C01 format to SOS number.
c Dial SOS numbers under monitor mode.
Retrieve
C04,B23,<alm-code>
01 alm-code: Alarm type, refer to Appendix–A. The same as alm-code field in setting
command.
B26 – Setting Alarm SMS Head String
Source
GPRS/COM/SMS
Description
B26,<alm-code>,<sms_string>
01 alm-code: Alarm type, refer to Appendix –A.
02 sms_string: SMS head string, 16 bytes length at most.
03 When send “B26” only, with alm-code and sms_string fields empty, set all head string
to default
04 Refer to Appendix-A for default string.

FIFOTRACK Q3 Specifications

General

Brand	FIFOTRACK
Model	Q3
Category	GPS
Language	English