FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
20
B73 – Setting SOS Dial Interval
Source
GPRS/COM/SMS
Description
B73,<sos-interval>
01 For some phones, voicemail answers incoming call when no person picks it up. It may
cause device NO dialing the next SOS number. B73 command can be used to avoid
this situation.
02 sos-interval: Interval of dialing SOS number, unit second, default 0. When the interval
time arrived, device hangs up the current number, and dials the next one.
03 Setting proper sos-interval according to actual situation.
Reply
B73,<err_code>
01 err_code: procession error code.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
Example
Retrieve
C04,B73
B74 – Setting Auto Answer
Source
GPRS/COM/SMS
Description
B74,<auto-answer>
01 Default, pressing CAL button to answer the incoming phone-call; B74 command is
used to enable auto answer
02 auto-answer: 0 (default)~Disable auto answer, it is needed to press CAL button to
answer the incoming phone-call; 1~Enable auto answer, tracker answers the
incoming call after ringing once
Reply
B74,<err_code>
01 err_code: procession error code.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
Example
Retrieve
C04,B74
B75 – Setting Favorite Contact
Source
GPRS/COM/SMS
Description
B75,<contact-no>
01 contact-no: Favorite contact phone number
02 After contact-no set, long press CAL button to start dialing
Reply
B75,<err_code>

FIFOTRACK Q3 Specifications

General

Receiver Sensitivity	-167 dBm
Tracking Sensitivity	-160 dBm
Acquisition Sensitivity	-148 dBm
Update Rate	Up to 10 Hz
Operating Current	25 mA
Weight	1.1 g
GNSS	GPS, GLONASS, Galileo, BeiDou, QZSS
TTFF (Open Sky) - Hot Start	1 s
Accuracy	2.5 m
Operating Temperature	-40°C ~ +85°C
Dimensions	16 x 12.2 x 2.4 mm