FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
21
01 err_code: procession error code.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
Example
Retrieve
C04,B75
B76 – Setting No Movement Alarm
Source
GPRS/COM/SMS
Description
B76,<nm1-tmr>,<nm1-sh:nm1-sm>,<nm1-eh:nm1-em>,<nm2-tmr>,<nm2-sh:nm2-sm>,<
nm2-eh:nm2-em>,<wday>,<pre-alarm-t>
01 nm1: “No Movement #1”; nm2: “No Movement #2”
02 nm1-tmr: No movement #1 duration time, unit second, default 0
03 nm1-sh:nm1-sm: No movement #1 start hour and start minute, 24-hour format,
separated using ‘:’
04 nm1-eh:nm1-em: No movement #1 end hour and end minute, 24-hour format,
separated using ‘:’
05 nm2-tmr, nm2-sh:nm2-sm, nm2-eh:nm2-em: The same as no movement #1
06 wday: week day selected, one or more combinations in below table, default 1234567
wday
Week day
1
Monday
2
Tuesday
3
Wednesday
4
Thursday
5
Friday
6
Saturday
7
Sunday
07 pre-alarm-t: pre-alarm duration for no movement alarm, unit second, range [6,+∞),
default 0. During pre-alarm, tracker starts voice displaying to remind user, shaking or
short-press-sos to cancel pre-alarm. “No Movement” alarm GPRS/SMS data package
sent as below description:
pre-alarm-t == 0: data package sent immediately after no movement detected
pre-alarm-t != 0: Firstly, tracker starts pre-alarm, and sends data package after
pre-alarm-t expired
08 When only nm1-tmr field specified, enable no movement detection for all time, and
every day
09 When tracker is in charging, no movement detection will be paused temporarily, till
charging cable removed
10 “No Movement” alarm code 22. Refer to Appendix-A for more detail
Reply
B76,<err_code>
01 err_code: procession error code.
OK – Succeed.

FIFOTRACK Q3 Specifications

General

Brand	FIFOTRACK
Model	Q3
Category	GPS
Language	English