Fike DUONET - Sounding the Alarms; Silencing the Buzzer; Exiting Access Level Two

Duonet Control Panel User Guide
11
Sounding the Alarms
To sound the alarms at any time after they have been silenced, proceed as follows:
1.
Press
’SOUND ALARMS’
The alarm sounders will activate. The panel buzzer
and the fire indication lights will also switch on.
Silencing the Buzzer
To silence the panel buzzer press the [SILENCE BUZZER] button at access level two as above.
1.
Press
’SILENCE BUZZER’
The panel buzzer will be silenced.
Exiting Access Level 2A (User) or Access Level 2B (Supervisor)
In order to prevent unauthorised access to the system, return to Access Level 1 (Normal). However, if
left untouched the display will time out after a short while and return automatically to Access Level 1
(Normal).
1.
Turn the key
OFF
if it is turned on.
Or;
Press ‘ESC’ until the system
shows NORM in the top right hand
corner.
The ‘CONTROLS ENABLED’ light will switch off and
the controls are disabled.
NORM is displayed in the top right hand corner.