15
DAILY MAINTENANCE
3. CLEANING THE SQUEEGEE
Verify that the squeegee rubbers are always clean, for a better drying action.
To clean them you must:
1. raise the machine
2. carefully clean the inside
3. carefully clean the squeegee rubbers
ATTENTION: This operation must be carried out wearing gloves to
protect against contact with dangerous solutions.
ATTENTION: Before carrying out any type of maintenance, disconnect
the machine's power supply cable.
4. REPLACING THE SQUEEGEE RUBBERS
Verify that the state of wear and tear of the squeegee rubbers and, if necessary, replace them.
To replace it you must:
1. Raise the squeegee
2. Remove the two knobs
3. dis-assemble the squeegee from its support
4. remove the tube from the squeegee nozzle so that the squeegee can be removed
ATTENTION: This operation must be carried out wearing gloves to
protect against contact with dangerous solutions.
ATTENTION: Before carrying out any type of maintenance, disconnect
the machine's power supply cable.
To Next Page
Loading...
