16
DAILY MAINTENANCE
5. Unscrew the knobs on the squeegee that block the rubber-pressing blades and remove
them
6. Remove the rubber-pressing blades
7. replace the rubbers
8. Reassemble everything, carrying out the above-mentioned operations in the reverse order.
ATTENTION: This operation must be carried out wearing gloves to
protect against contact with dangerous solutions.
ATTENTION: Before carrying out any type of maintenance, disconnect
the machine's power supply cable.
5. DISASSEMBLING THE BRUSH
1. raise the squeegee
2. Raise the machine by using the handlebars as a lever and position it with the recovery tank
on the ground.
3. With the base raised, remove the brush manually by rotating it clockwise.
ATTENTION: During this operation, check there are no people or
objects near the brush.
ATTENTION: Before carrying out any type of maintenance, disconnect
the machine's power supply cable.
To Next Page
Loading...
