21
Intelligent flight battery features
1. Power display: the battery comes with a power indicator, which can display the
current battery power.
2. Battery storage self-discharge protection: after fully charged and left for 24 hours
without any operation, automatic discharge will start, and the battery will be discharged
to 65% power to protect the battery.
3. Balance protection: automatically balance the battery internal cell voltage to protect
the battery.
4. Over-charging protection: Over-charging will seriously damage the battery and will
automatically stop charging when the battery is fully charged.
5. Charging temperature protection: Charging when the battery temperature is below
5℃ or above 40℃ will damage the battery, and the battery will stop charging when
it is outside the temperature range.
6. Charging overcurrent protection: High current charging will seriously damage the
battery, and the battery will stop charging when the charging current is detected to
be too large.
7. Over-discharge protection: Excessive discharge will damage the battery. When the
battery is not used for flight, the battery will be discharged to a certain voltage when
Cut off the output. The battery will not enable over-discharge protection during flight.
8. Short circuit protection: The battery will cut off the output to protect the battery if it
detects a short circuit.
9. Cell damage detection: If the battery detects cell damage or serious imbalance, the
APP will indicate that the battery pressure difference is too large or the cell is damaged.
10. Communication: The drone can get the battery information in real time through the
communication interface on the battery, such as voltage, power, current, etc.
Check the power level
Short press the power button to check the current power level.
The power indicator can be used to show the power of the intelligent flight battery
during charging and discharging, the indicator is defined as follows.
Intelligent Battery
Indicates that the LED is always on
Indicates that the LED is flashing regularly
Indicates that the LED is of
Indicates that the LED is flashing rapidly
To Next Page
Loading...
