5.6.1 Charging Turning on and off
6 Gimbal and Camera
6.1 Camera
6.2 Drone TF card
6.3 Gimbal
6.3.1 FIMI X8 SE combines a light weight 3-axis mechanical gimbal with the latest
professional control algorithms and ±0.004° control accuracy, which provides a stable
shooting platform for camera. The pitch axis, default to tilt from 0°to -90°, can be
adjusted by left dial of remote controller or App.
6.3.2 Operating Mode
6.4 Remote controller
6.5 Turning on and off
6.6 Assemble Device Shooting and Recording
6.7 Shortcut Buttons
6.8 Sticks Control Remote Controller Pairing
6.8.1 Mode 1
6.8.2 When a new remote controller or drone is replaced, please pair the remote
controller and the drone again as shown below
6.8.3 Mode 2
6.8.4 Mode 3
6.9 Remote lights
7 APP
7.1 Real-time Flight Parameters
7.2 Drone Status
7.3 Signal Status and General Settings
7.4 Map Interface
7.5 Metering Mode
7.6 Gimbal and Image Parameters
7.7 Camera Operation Area
7.8 8 Intelligent Flight
7.9 Map Interface Prepare to Fly
7.10 Check Before Taking off
7.10.1 Make sure that the battery of the aircraft and remote controller is sufficient.
7.10.2 Make sure that the camera lens is clean. Make sure that the TF card is inserted.
7.11 Confirm the drone heading
7.11.1 red green
7.12 Manual take landing Flying Condition Requirement
7.13 Stop propellers in an emergency
8 Maintenance and Calibration
8.1 Remote Controller Calibration
8.1.1 Please try to calibrate the remote controller when you detect inconsistencies
between stick control and drone flying.
8.2 Compass Calibration
8.2.1 If the magnetic field changes, the compass needs to be recalibrated to ensure
flight safety. If the drone’s compass needs to be calibrated, the App will give
corresponding hints and guidance. After entering the flight control menu, please
select “compass calibration”, and then calibrate based on prompts on the App.
8.3 Gimbal Calibration
8.4 Propellers Maintenance
8.5 Battery Maintenance
8.6 Gimbal Maintenance
8.7 Drone Self-check
8.8 Firmware Upgrade
8.8.1 Please check the firmware version regularly, new version will be pushed by Fimi
Navi App to prompt users to update.
8.9 Basic Specification
8.9.1 Drone
8.9.2 Charger
8.9.3 Remote controller
8.9.4 Battery
8.9.5 Gimbal
To Next Page
Loading...
