The drone enters the self-check when the drone is powered on. If the self-check failed, App will
pop up corresponding hints.
Firmware Upgrade
Please check the firmware version regularly, new version will be pushed by
Fimi Navi App to prompt users to update.
Please download new firmware when the App is connected with the drone and remote controller
Basic Specification
Drone
Product modelFMWRJ02A5 Dimensions204×106×72.6mm Diagonal size372mm
Take off weightAbout 786g Flight timeAbout 33min* Max ascending speed5m/s Max descending
speed4m/s Max flight speed18m/s
Satellite positioning systemsGPS/GLONASS Hover accuracy
Vertical:±0.1m (Within the ultrasonic detecting range)
±0.5m (when GPS positioning is active) Horizontal: ±1.5m Operating temperature0°C ~ 40°C
Suitable altitude≤5000m
Operating frequency5.725-5.850GHz
Charger
Rated input100-240V~50/60Hz 1.5A Rated output13.05V 3A
Rated power39.15W
Remote controller
Net weightAbout 373g Dimensions203.8×91×46.6mm Operating frequency5.725-5.850GHz
TypeRechargeable lithium battery Capacity3900mAh
Nominal voltage3.7V Input5 V 2A
Max transmission distanceAbout 5000m* Operating temperature0 ~ 40°C
Suitable altitude≤5000m
Battery