15
User Role
Employees with Super Admin rights are granted limitless access to all settings and sys-
tems within the terminal in addition to the ability to enroll new users. Super Admin can
also perform system Reset.
Employees with Normal User rights are only able to log in their attendance at a terminal.
They are unable to access the menu to modify settings within the menu.
In addition to the three defined roles, you are given the option to configure 3 different
subsets.
Dene Role
You can define what the administrator is allowed to do at the device. A maximum of three
different role sets can be configured. For example, you create a role called Network Ad-
min, and limit his access to the Network option only. Therefore, he is unable to enroll new
users or configure device settings.
To set the define user role:
Step 1: Press Menu > User Role
Step 2: Select User Defined Role > Press OK > Press OK again to enable the selected
Role
Step 3: Rename the Role > Define User Role > Save and Exit.
Once these roles have been defined, they will appear in the Users tab where you
can assign employees accordingly.
Assign Role
To define roles for new employees:
Step 1: Menu > User Mgt > New User > User Role
Step 2: Select the role to assign to the employee > Save and Exit.
To define roles for existing employees:
Step 1: Menu > User Mgt > All Users > Press OK > Select the User ID > Press OK > Edit
Step 2: User Role > Select the role to assign to the employee > Save and Exit
To Next Page
Loading...
