29
Voice
You can choose to enable or disable the voice prompts, keyboard sound or adjust the
volume of the device.
To enable or disable the options:
Go to Menu > Personalize > Voice > Press OK to Enter > Press arrow and OK button
• Voice Prompt: You can choose to disable or enable the voice greetings or feedback
during the operations.
• Keyboard Prompt: You can choose to enable or disable the beeping sounds when
pressing on the keys
• Volume: You can adjust the volume of the voice greetings/feedback and keyboard
beeps
Bell
You can schedule the device to ring automatically during specific times. This is a re-
minder to alert the employees to start/end work, start/end of break time etc.
To activate this function, you have to create a new bell schedule:
Go to Menu > Personalize > Bell Schedules > Press OK to Enter > New Bell Schedule >
Set the option accordingly:
• Bell Status: To turn the bell on or off.
•
Bell Time: Set the time for the bell to ring automatically.
•
Repeat: Set the bell to repeat on certain days or every day.
•
Bell Type: You can set for the bell to be triggered from the internal bell or from an
external bell that is wired to the device.
•
Ring Tone: Select the bells’ preferred ring tone
•
Internal Bell Relay: Specifies the time duration for the alarm to ring (ranges from 1s to
999s).
Edit and Delete a Preset Schedule
Once you have created a bell schedule, you can edit or delete the schedule entirely.
Editing the function is similar to adding a new schedule:
Go to Menu > Personalize > Bell Schedules > Press OK > All Bell Schedule > Press OK >
Press Down arrow to select the bell schedules > Press OK > Press Edit to edit the existing
schedule or Delete to delete the schedule.
To Next Page
Loading...
