16
4 feet / 1.2 meter
(recommended)
POWER PORT
TCP/IP PORT
........
Chapter 4
Installations & Communication
Installations
FingerTec terminals offer several connections for power and communications. In-
stallations of FingerTec time attendance terminals are simple.
Mount On Wall
After measuring the height ac-
cordingly and make relevant
marking on the wall, drill the
screws into the wall to secure the
back plate.
Attach the terminal to the back
plate and tighten the screws.
Communications
Connection points for power and communication are available on top of the termi-
nals. Refer to the following diagrams for the terminals you require.
To Next Page
Loading...