FingerTec TA500 - Chapter 1 Getting Started

5
A Packet of Bolts
DC 5V Power Adaptor
Siren Cable
RFID Cards (5 pieces)
*Exclusively for TA500-R
model only
Chapter 1
Getting Started
Viewing the User Guide in the Internet
The User Guide is available in the package when you purchased the terminal. The User
Guide is also available online at https://product.fingertec.com/userguide.php
Choose the language that you prefer for your User Guide.
Terminal Included Accessories
Do not abuse the fingerprint sensor by scratching the surface, contacting the sensor’s
surface with heat, pressing hard during placement of fingerprint for verification. Clean
the sensor occasionally with microfiber cloth to maintain the performance of the
sensor.
ITEM
DC 5V Power Adaptor
A Packet of Bolts
Screwdriver
Siren Cable
RFID Cards (5 pieces)
FUNCTION
For supplying power to the terminal.
Use the screws to hold the back plate of the terminal against a wall.
Use the screwdriver to open the back plate of ngerprint terminal and to
install the back plate against a wall.
For connecting the terminal to external siren.
For card enrollment and verication.