20
Upload
Uploading is the process of copying data from a USB drive into a device. The data has to
be copied from the software to the USB Drive. To begin uploading your data, connect
the USB to your device
To uploading the data:
Go to Menu > USB Manager > Upload
• Upload Wallpaper : Create a new folder named “wallpaper” in the root directory of fat
32 format 8gb usb drive or bellow and place wallpaper images into the directory. A
maximum of 20 images can be stored. Each image cannot exceed 30kb and 320x218
resolution in pixels.
• Upload Work Code: Upload the work code ID.
• Upload Short Message: Upload the short message.
• Upload Screen Saver: Create a new folder named “advertise” in the root directory of
fat 32 format 8gb usb drive or bellow and place screensaver images into the direc-
tory. A maximum of 20 images can be stored. Each image cannot exceed 30kb and
320x218 resolution in pixels.
Download Options
You can configure your device to encrypt data and transaction logs when downloading
onto a USB drive to avert alterations made by staff members. Logs can be chosen for
deletion after being downloaded into your USB drive to free up disk space.
Go to Menu > USB Manager > Download Options > Press OK to Enter > Select either
Encrypt Attendance Data or Delete ATT data > Press OK to either turn the function on
or off.
Conf.igure WiFi
A wireless connection (WiFi) is an available hardware feature in some FingerTec devices.
You can link up your devices with the software via a wireless connection.
To configure the WiFi connection:
Step 1: Menu > Comm. > Wireless Network > OK to enable WiFi connection > ESC to
Save and Exit.
Step 2: Wait for the device to scan the SSID of your WiFi network.
Step 3: Select the SSID of the WiFi network > OK to confirm
Step 4: Insert the WiFi password > OK to confirm
Step 5: Select to use DHCP or Manual assign IP
Step 6: ESC to return to the main menu
Step 7: The WiFi icon appears on the main menu
To Next Page
Loading...
