12
After that it is possible to remove the telescopic slides by lifting the front part of the slide up
(to extract it from the rack in the front part) and pulling the slide frontward, to extract the rear
part. Repeat the same operations, but inverting the sequence to reposition the slides and the
drawers.
Figure 4
The wall-racks are even easily removable in order to allow a better cleaning of the interior of
the appliance.
The racks mounted in the front part can be removed pushing them upward (fig.5), while the
ones mounted in the rear side can be removed by first, unscrewing safety fixing screw (using
a cross screwdriver) positioned in the top part (fig.6), and then pushing against the internal
wall the small plastic edge on the top part of the rack and simultaneously pulling the rack
itself upward (Fig 5).
To Next Page
Loading...
