FIOCCHETTI ECT-F TOUCH - Description of Panel INFO 1

16
5.2.2 DESCRIPTION PANEL INFO 1
Touch the temperature value to visualize all the useful information of the equipment both for
the user and for the Service.
MESSAGE
MODE IN PROGRESS
PAUSE
Compressor is OFF, waiting for next cooling cycle
COOLING
Compressor is ON to reach setpoint
DEFROST
The equipment is defrosting, i.e. warming up the evaporator
DRIPPING
Last phase of the defrost cycle to allow dripping of condensate water
RECOVERY
After a defrost cycle the compressor is ON to reach again the setpoint
HEATING
Warming up phase is ON (ONLY FOR PRESET MODELS)
Touch the green
arrows to browse
pages or touch the
“Home” symbol to go
back to homepage.
Figure 13
Figure 12