FIOCCHETTI ECT-F TOUCH - Drawbacks and Remedies; Troubleshooting Equipment Issues

42
14 DRAWBACKS AND REMEDIES
The following table provides guidance in identifying the causes and solve the most frequent
anomalies, which do not allow technical service.
Electrical repairs may be also performed by your electrician.
Before contacting Technical Service, make sure you tried all the recommended
checks for user.
DRAWBACK
POSSIBLE CAUSE
SOLUTION
The equipment does
not turn on
 Controller Stand-by
 Switch the controller on,
Par. 5.2.1
 No mains
 Check power supply
 Power supply not plugged in
 Check plug, socket, fuses
and power line
 Faulty control panel
 Contact service
 Other
 Contact service
Equipment does not
reach set temperature
 Too many products have been
filled in the chamber.
Or
Too humid material in the
compartment
Or
Material at room temperature
(+25°C) in freezer
compartment
 Once the temperature inside
the chamber has stabilized,
fill the products little by little.
Reduce the quantity of
products and keep distance
from shelves and walls.
The freezer has been
designed for storage of
products; it is suggested to
fill in products gradually and
in small quantities.
 Too long and too frequent
door openings.
 Reduce the number of door
openings; close the door as
soon as possible.
 Too high ambient temperature
 Cool down the ambient.
 Condenser clogged by dirt and
dust
 Clean condenser Par. 8.3
 Controller is not functioning
properly
 Contact service
 Cooling system is not
functioning properly
 Contact service