54
TWIN
COMMUNICATION
FAILURE
Turn the refrigerator off from
the diplay, -STAND BY-
Par.5.2.8. After a while turn it
on and the visual and
acoustic alarm is off.
Tap the off alarm/fault icon so
to permanently delete the
signal (par.5.2.16).
If the problem occurs again,
contact technical service
Connection cable between two
electronic boards faulty
In order to be able to arrange a prompt intervention, at the moment of calling, please
provide the mode of the appliance and the relative Serial Number that can be found on
the data plate placed inside of the appliance or on the present manual.
To Next Page
Loading...
