Name: FireAngel EZ-212
Brand: FireAngel
Rating: 5 (1 reviews)

Questions and Answers:

C
Chad CooleyJul 31, 2025
What to do if my FireAngel Smoke Alarm goes off when no smoke is visible?
- L
  Lori GuzmanAug 1, 2025
  If your interconnected FireAngel Smoke Alarms are alarming without visible smoke, first identify the unit causing the alarm by looking for a red light flashing once per second. If none are flashing, switch off electrical power and inspect the interconnect wiring. Then, switch off the electrical power to the FireAngel Smoke Alarm. Remove any static electricity by wiping the unit with a slightly damp cloth. Regularly clean the FireAngel Smoke Alarm and check its location to ensure proper placement. Ensure the green light is on.
T
Tina CooperAug 8, 2025
Why does my FireAngel Smoke Alarm keep going off?
- P
  pshannonAug 8, 2025
  If your interconnected FireAngel Smoke Alarms experience frequent unwanted alarms, identify which unit is causing the alarm by looking for a red light flashing once per second. If none are flashing, switch off electrical power and inspect the interconnect wiring. Switch off electrical power to the FireAngel Smoke Alarm. Remove build-up of static electricity by wiping the FireAngel Smoke Alarm with a slightly damp cloth. Clean the FireAngel Smoke Alarm regularly and check its location. Fully charge the FireAngel Smoke Alarm and ensure the green light is continuously on when charging. Test the FireAngel Smoke Alarm.
A
Aaron WilliamsAug 16, 2025
What to do if my FireAngel EZ-212 doesn't sound when I test it?
- S
  Samantha AndradeAug 16, 2025
  If your FireAngel Smoke Alarm doesn't sound during testing, it might be because the test button was pressed multiple times in quick succession. Wait 15 minutes before re-testing. Ensure the FireAngel Smoke Alarm is fully charged, with the green light continuously on when charging. Clean the FireAngel Smoke Alarm regularly. Check that the FireAngel Smoke Alarm is properly installed. Test the FireAngel Smoke Alarm using the test button. If the button test works but the light switch test doesn't, inspect the wiring.