Protect supply with a 5A fuse.
ELECTRICAL SUPPLY
The boiler and controls require 230V 50Hz mains electric supply protected with a 5A fuse.
The warranty on this product will be rendered void if damaged by power from a stand by electricity supply i.e. (generator).
This appliance must be earthed.
A qualified electrician must carry out all electric wiring in accordance with current I.E.E regulations and any local regulations
which may apply.
The mains electrical supply must be taken from a double pole isolating switch with a 5A fuse, positioned somewhere close to
the boiler. Heat resisting cable must be used which can be routed into the boiler through the access provided on either side
of the base. Ancillary controls may be provided for with terminal connections in the control panel.
To Next Page
Loading...
Need help?
General
