FireClass ESSENTIAL 2 - Page 4

Table 1: General indicators
Indicator icon Indicator description Indicator colour Operating condition
Steady on for delay
programming mode
selection
Flashes twice when
the delay time is
overridden
Flashes continuously
when the delay time is
set
Delay Yellow
Off when the delay is
disabled for all zones
Zone fault Yellow See Zone fault
detection
Table 2: Zone location indicators
Indicator icon Indicator description Indicator colour Operating condition
Flashes when a zone is
in an alarm condition
Separate fire LED
indicator for each zone
Red
Steady on when
the alarm buzzer is
silenced
Depending on the type
of fault, this flashes
when a zone is in a
fault condition
Separate fault LED
indicator for each zone
Yellow
Steady on when a zone
is disabled
UI buttons
Table 3: UI buttons
Button icon Button description Button functionality Button availability
Enable/disable See Using the enable/
disable button
In access level 2 and 3
Reset See Using the reset
button
In access level 2 and 3
Buzzer silence See Using the buzzer
silence button
In access level 1, 2, and
3
FireClass Essential Panels User Manual4