• To navigate through functions such as test mode, enable/disable, and delay to output for
individual zone programming.
Using the silence/resound/evacuation button
1. Following a fire alarm condition, to silence the sounders and deactivate the remote output,
press the Silence/Resound/Evacuation button.
The fire alarm LED is unaffected by the sounder silence/resound/evacuation button.
2. To turn on the previously silenced sounders and reactivate the remote output, press the
Silence/Resound/Evacuation button.
3. To turn on the sounders, fire relay, and remote output for manual evacuation, press the
Silence/Resound/Evacuation button.
The general fire LED starts to flash in evacuation.
Using the right navigation button
Press the Right Navigation button in the following events:
• To navigate between zones and the sounder in enable/disable programming.
• To navigate between zones in test programming.
• To navigate between zones in delay to output programming.
Using the left navigation button
Press the Left Navigation button in the following events:
• To navigate between zones and the sounder in enable/disable programming.
• To navigate between zones in test programming.
• To navigate between zones in delay to output programming.
FireClass Essential Panels User Manual6
To Next Page
Loading...
