7
Figure 6: Firmware update window
Firmware update menu
Click on Firmware Update; see Figure 6. From a source
file, you can carry out a firmware update of all the system
interface including the Main board, User interface, Loop
controller and Repeater.
Note: If the FC500REP-NEW repeater has a firmware
version 3 or less, and the language is Italian while English
appears on the panel, the installer must realign the
language strings after the firmware update, using the
language change process; see paragraph 8-Key System
on page 47 of the Installation manual.
Screen saver menu
In the Screen Saver menu, you can insert four lines of text,
such as installer address and telephone, which will load on
the user interface display when the panel is in standby
status. The four rows can include steady, scroll or blink.
Figure 7: Account window
Account menu
In the Account menu, enter the account data. For better
account identification, enter the address, click on the
address field and the software attempts to find the address
on Google maps if you have an internet connection.
To Next Page
Loading...
