Firetrol FTA1100 Series User Manual

12
Turn the Main Selector Switch to the “HAND” position.
Note: Before starting the engine, verify that the engine has been officially commissioned (by an authorized engine
representative or service dealer) and that the exhaust pipe is connected properly.
Perform an engine start on both batteries individually by pressing the associated crank button. Turn the engine off by
switching the Main Selector to the “OFF” position before starting the test on the other battery.

Firetrol FTA1100 Series Specifications

General

Brand	Firetrol
Model	FTA1100 Series
Category	Controller
Language	English